Case Studies
Structural solutions. Dependable performance.
Spraywall® in Montgomery Alabama
When it comes to protecting the water and wastewater systems that support our communities, it’s critical that a robust, reliable long-term solution is found.
Montgomery Water Works and Sanitary Sewer Board was struggling with products that were on short-term fixes and materials that were delaminating from the surfaces within their sewer structures.
After considering several products, SprayWall® was chosen for the job. Years later the product is still performing with rock-solid dependability.
Learn how Montgomery Water Works and Sanitary Sewer Board partnered with Sprayroq™ to find a long-term solution to their aging sewer infrastructure.
Read Full Case StudyPerry Point, MD
A federal facility built during WWII for the manufacturing of military grade explosives and converted into a Veterans Association Hospital Campus after the war. A freshwater treatment facility was built on the campus in the early 1950’s to provide potable water for the entire self-sufficient campus.
Read Full Case StudyColorado
Rehabilitation of eighteen manholes. Approximately 200 vertical feet and two large vault structures approx. 10,000 sq./ft.
The job also dealt with below freezing temperatures and extremely narrow one-way roads for access.
Read Full Case StudyMedora, ND
Located 130 miles west of Bismarck along I-94, Medora is a famous little Badlands town with a significant tourism population.
A 90” corrugated steel plate culvert (commonly referenced as CMP) that runs for 700 linear feet directly under Interstate 94 near Medora was badly decomposed.
The solution design called for a 500-mil application, and it was decided to spray only the first 130 feet, starting from the point of entry at the inlet end.
The Sprayroq Certified Partner (SCP) successfully installed Spraywall without disruption to the Medora tourist traffic and while minimizing construction capital costs but also maximizing on Spraywall’s long term return on investment (ROI).
Read Full Case StudyWormsley, PA
Reinforcement of PVC piping for freshwater skimming system. The current stainless-steel piping is expensive, and the industry was moving away from metallic components. This skimmer pipe is designed with slots to remove debris floating on the top of the water. Since the pipe is floating on the surface and is, mostly empty, the upward force is about 400 pounds. This caused a 10-inch PVC pipe to deflect and not skim equally across its length.
Read Full Case StudyApply to be a Sprayroq™ Certified Partner
Apply to become a Sprayroq™ Certified Partner (SCP) and you too can experience the profitability that comes with protected territories and a powerful, resilient product that you can trust.
